佳能7010c执行清洁定影单元_佳能7010c执行清洁定影单元1

佳能7010c执行清洁定影单元

更换定影单元是维护佳能7010c复印机必不可少的一项步骤，由于不同的定影单元对复印机的清洗要求也不同，因此，可根据定影单元来进行清洗：

1、首先，关闭复印机，打开定影单元顶盖，拆下顶盖，可以看到定影单元以及辊筒；

2、将定影单元及辊筒卸下，使用湿抹布擦拭定影单元；

3、使用细度2000或4000的研磨纸有轻微地擦拭定影单元；

4、将定影单元充分放置在一片干净的纸张上，使其完全干燥；

5、将定影单元放回原位，并将辊筒放回原位，将定影单元顶盖重新安装；

6、打开复印机，将定影单元完成清洁过程；

7、打开操作屏幕，进入“定影单元更换”选项，将定影单元更换为新的单元，关闭操作屏幕；

8、进行佳能7010c复印机正常使用；

此外，在更换定影单元之前，应先检查定影单元是否老化，若老化则马上更换备用定影单元，并在更换定影单元完成后，通过检查打印样张确保定影单元的正常使用。最后，应定期对复印机定影单元进行清洗以保证其正常使用，避免复印机发生故障，确保复印机的良好运行状态。

英文：

Cleaning and Fixing Unit for Canon 7010c

Replacing the fixing unit is a necessary step for maintaining the Canon 7010c copier, and different fixing units have different cleaning requirements. Therefore, the cleaning can be carried out according to the fixing unit:

1. First, turn off the copier and open the fixing unit cover. Take off the cover and you can see the fixing unit and roller.

2. Take off the fixing unit and roller, and use a damp cloth to wipe the fixing unit.

3. Use a 2000 or 4000 grit sandpaper to gently wipe the fixing unit.

4. Place the fixing unit fully on a clean sheet of paper to make it completely dry.

5. Put the fixing unit back in place and place the roller back in place. Install the fixing unit cover again.

6. Turn on the copier and the fixing unit cleaning process is completed.

7. Open the operation panel, enter the "Fixing Unit Replacement" option, replace the fixing unit with a new one, and close the operation panel.

8. Perform normal operation of Canon 7010c copier.

In addition, before replacing the fixing unit, check whether the fixing unit is aging. If so, replace the spare fixing unit immediately and after the fixing unit is replaced, check the print sample to ensure the normal use of the fixing unit. Finally, it is necessary to clean the fixing unit of the copier regularly to ensure its normal use, avoid malfunctions of the copier, and ensure the good running state of the copier.